Machine safeguarding
Training program standard

SAFE Work Manitoba has made reasonable attempts to confirm the accuracy of the information contained in this document. However, this document is intended for general information purposes only. SAFE Work Manitoba shall not assume responsibility or liability for actions taken or not taken due to reliance on information in this document alone. Manitoba employers must comply with the Manitoba Workplace Safety and Health Act and Regulation, which may be amended occasionally.

1. Training standard topic

Machine safeguarding

2. Purpose

The purpose of a machine safeguarding training program standard is to provide workers with:

• an awareness of the hazards and risks associated with machines and tools
• an understanding of what controls are available to protect against that risk and how those controls work
• awareness of the legislation and standards associated with machine safeguarding

The training is intended for workers operating, maintaining, cleaning and/or working around machinery or equipment.

The Machine Safeguarding Training Program Standard outlines the minimum requirements for developing and delivering machine safeguarding training programs in Manitoba. It was developed in consideration of the Manitoba Workplace Safety and Health Act and Regulation and Canada Labour Code Part II and is consistent with the CSA standard Z432: Safeguarding of Machinery.

Please note that this training standard does not include details on lockout and working with robots.

3. Design

The design of the training program must meet the following criteria:

• Compliance with adult learning principles:
  
  1. Ensure learners know why they need to learn specific content and its relevance to their workplaces
  2. Relate training to learners’ own experiences when simulating workplace scenarios
  3. Challenge and engage learners using a variety of activities that allow opportunities for participation, feedback and interaction
  4. Recognize the limits of attention spans and apply techniques to address the various ways that adults learn
  5. Use realistic activities and tools to support the transfer of learning to the workplace
• Use language that is appropriate for all learners
• Provide content that is accurate and current
• Include references to legal and technical information
• Use a variety of technical teaching aids
• Provide learner materials that follow the principles of instructional writing and good graphic design
• Be consistent with provincial and federal legal requirements

4. Delivery

Regardless of the delivery method, all Endorsed Training programs must meet the requirements of this standard along with the Accessibility for Manitobans Act. The delivery method must be reasonable and practicable to support the learner’s ability to attain the applicable learning outcomes.

4.1     Face-to-face learning

 The following is the maximum ratio of learners to instructor:

• Basic theory module:  24:1

The following are the minimum hours for training delivery:

• Basic theory module: 3.5 hours

The timing for delivery of this training program may be extended for various reasons, such as the amount of equipment available to demonstrate learning outcomes, instructor experience and/or the learning needs of training participants.

4.2     eLearning and blended learning

The eLearning content should be consistent with Manitoba eLearning instructional design guidelines.

This type of learning is acceptable for:

• Basic theory module

4.3     Distance learning

Distance learning includes training via a live video link; a plan for interactivity with a qualified instructor should be developed and available.

This type of learning is acceptable for:

• Basic theory module

5. Learning outcomes

Employers will need to supplement any training program that meets the requirements of this training program standard with additional information, instruction, and training in workplace-specific policies and procedures, workplace-specific hazards, and equipment related to machine safeguarding.

5.1     Basic theory module

5.1.1 Legal requirement

Content must include:

• an overview of the legal framework, including rights, duties and responsibilities and general requirements pertaining to working with machinery and equipment
• a brief overview of the CSA standard Z432 Safeguarding of Machinery, including what is contained in the standard, and how to access the standard

At the end of this module, learners will be able to:

• identify parts of the Manitoba Workplace Safety and Health Act and Regulation and/or Canada Labour Code Part II, as applicable, pertaining to working with machines and equipment
• explain the duties and responsibilities of the employer, supervisor and worker as they relate to machine safeguarding
• describe workers’ rights and how they relate to working with machines and equipment  
• describe the importance of the owner’s manual and manufacturer’s specifications
• recognize the need for and importance of the CSA Standard for Safeguarding of Machinery and how to access it
• describe what a competent and authorized person is in relation to designing and/or modifying machine safeguarding.

5.1.2 Hazard identification and risk assessment

Content must include:

• an overview of the common hazards associated with working around machines and equipment, including but not limited to entanglement, abrasion, cutting, pinching, shearing, puncturing, impact, crushing, drawing in, injection by gas or liquids under pressure, hazardous surface temperatures and hazardous energy
• an overview of other machine hazards, including but not limited to noise, vibration, radiation and musculoskeletal hazards
• an overview of the process for conducting a job hazard analysis and risk assessment, including the factors to be considered for prioritizing hazards

At the end of this module, learners will be able to:

• identify the common hazards associated with working around the moving parts of machines
• identify other hazards associated with machines and equipment
• describe the process for conducting a job hazard analysis and risk assessment
• perform a risk assessment on identified hazards

5.1.3 Machine hazard controls

Content must include:  

• an overview of the hierarchy of controls, including common control measures to reduce or eliminate the risk associated with working with and/or around machines and equipment
• an overview of the general types of guards and their basic function, including but not limited to adjustable, fixed, fixed distance, interlocked, movable and self-closing
• an overview of machine guards used on common machinery in the industry and their basic function

At the end of this module, learners will be able to:

• describe the hierarchy of controls and understand the importance of using the hierarchy of controls for eliminating or reducing risk
• distinguish between the different types of control measures associated with each hierarchy of control
• identify different control measures to eliminate or reduce the risk associated with machine hazards
• explain the purpose and function of safeguards
• recognize when safeguards are required
• identify the general types of machine guards and explain their basic function
• identify specific machine guards used on common machinery in their industry
• describe the need for safe work procedures for working with and/or around machines and equipment
• describe the requirements for additional safeguards, such as operating controls, emergency stops and warning systems
• explain the control measures for unattended or suspended machines

5.1.4 Removal of safeguards

Content must include:

• an overview of requirements for the removal of safeguards with reference to legislation, including steps to perform during removal and tasks, such as servicing, repairs, tests, cleaning, maintenance and adjustments that may require the removal of safeguards
• an overview of the requirements for implementing alternative mechanisms

At the end of this module, learners will be able to:

• explain the situations in which a safeguard may or may not be removed
• describe the required steps involved with safeguard removal, including machine lockout
• recognize the need for safe work procedures for tasks that may require removal of safeguards
• describe alternative mechanisms and when they can be used

6. Resource material

The machine safeguarding training standard has material requirements for both learners and instructors.

The date and version number should be indicated on all resource materials, which include:

• terms and definitions
• job aids, evaluation tools and templates
• copies of the applicable provincial or federal safety legislation
• manufacturers’ instructions for equipment
• participant and instructor manuals with copies of activities
• instructor manual and lesson plan

Learner materials will include:

• learning objectives, agenda, training content and evaluation/testing

Instructor materials will include:

• instructional methods, learning activities and lesson plan timing
• detailed instructor manual and lesson plans, including all learning activities and audio-visual resources

7. Learner Evaluation

The training program must include a plan for learner evaluation that meets the requirements below. The instructor and/or evaluator must have a variety of evaluation methods appropriate to the learning outcomes.

7.1     Evaluation Methods

The training program will include methods to evaluate whether key concepts have been understood by the learner using a variety of evaluation methods that are appropriate to the learning outcomes, including:

• open discussion
• group discussion
• questions and answers
• written and/or oral test, where applicable

Evaluation methods must be clearly outlined in the evaluation plan and the evaluator must document corresponding results.

7.2     Evaluation of demonstration learning outcomes

For learners with language, literacy, or accommodation needs, alternative evaluation methods may be employed to verify the learner’s satisfactory demonstration of learning outcomes. These evaluation methods must be clearly outlined in the evaluation plan, and the evaluator must document the corresponding results.

8. Validation/refresher requirements

8.1     Validation requirements

Learners who successfully complete an approved machine safeguarding training program must periodically refresh their training to maintain its validity. This requirement supports learners in maintaining their foundational knowledge and skills.

Completing the basic theory module per the criteria set out in this standard and the training provider standard is required to confirm a successful training program has been completed.

Training remains valid for three years from the date the machine safeguarding basic theory module is successfully completed.

8.2     Refresher training

A worker’s training is revalidated for another three years after successfully completing the refresher training for the machine safeguarding basic theory module.